D-Link DWS-4000 Series Cli Command Reference page 88

D-Link Unified Switch CLI Command Reference
Format
port-channel <name>
Mode Global Config
no port-channel
This command deletes a port-channel (LAG).
Format
no port-channel {<logical slot/port> | all}
Mode Global Config
addport
This command adds one port to the port-channel (LAG). The first interface is a logical slot/port number of a configured port-
channel.
Note: Before adding a port to a port-channel, set the physical mode of the port. For more information, see
on page 16.
Format
addport <logical slot/port>
Mode Interface Config
deleteport (Interface Config)
This command deletes the port from the port-channel (LAG). The interface is a logical slot/port number of a configured port-
channel.
Format
deleteport <logical slot/port>
Mode Interface Config
deleteport (Global Config)
This command deletes all configured ports from the port-channel (LAG). The interface is a logical slot/port number of a
configured port-channel. To clear the port channels, see
Format
deleteport {<logical slot/port> | all}
Mode Global Config
lacp admin key
Use this command to configure the administrative value of the key for the port-channel. The value range of <key> is 0 to
65535.
Default 0x8000
Format
lacp admin key <key>
Mode Interface Config
© 2009 D-Link Corporation. All Rights Reserved
80
"clear port-channel" on page 432
"speed"
.