D-Link DWS-4000 Series Cli Command Reference page 163

bridge aging-time
This command configures the forwarding database address aging timeout in seconds. The <seconds> parameter must be
within the range of 10 to 1,000,000 seconds.
Default 300
Format
bridge aging-time <10-1,000,000>
Mode Global Config
no bridge aging-time
This command sets the forwarding database address aging timeout to the default value.
Format
no bridge aging-time
Mode Global Config
show forwardingdb agetime
This command displays the timeout for address aging. In an IVL system, the [fdbid | all] parameter is required.
Default all
Format
show forwardingdb agetime [fdbid | all]
Mode Privileged EXEC
Term Definition
Forwarding DB ID Fdbid (Forwarding database ID) indicates the forwarding database whose aging timeout is to be
shown. The all option is used to display the aging timeouts associated with all forwarding databases.
This field displays the forwarding database ID in an IVL system.
Agetime • In an IVL system, this parameter displays the address aging timeout for the associated forwarding
database.
•
show mac-address-table multicast
This command displays the Multicast Forwarding Database (MFDB) information. If you enter the command with no
parameter, the entire table is displayed. You can display the table entry for one MAC Address by specifying the MAC address
as an optional parameter.
Format
show mac-address-table multicast <macaddr>
Mode Privileged EXEC
Term Definition
MAC Address A multicast MAC address for which the switch has forwarding and or filtering information. The format
is two-digit hexadecimal numbers separated by colons, for example 01:23:45:67:89:AB. In an IVL
system the MAC address will be displayed as a MAC address and VLAN ID combination of 8 bytes.
Type The type of the entry. Static entries are those that are configured by the end user. Dynamic entries are
added to the table as a result of a learning process or protocol.
MAC Database Commands
155