D-Link DWS-4000 Series Cli Command Reference page 289

36 Mbps
48 Mbps
54 Mbps
show wireless multicast tx-rates
This command displays the multicast transmit rates valid for a specified physical mode. This is intended to help you
determine valid values for the radio configuration command.
Format
show wireless multicast tx-rates {a | bg}
Mode Privileged EXEC
Field Description
Mode Indicates the physical layer technology to use on the radio.
Valid Rates Indicates data rates valid for the physical mode.
Example: The following shows example CLI display output for the command.
(DWS-4026) #show wireless rates a
Mode........................................... IEEE 802.11a
Valid Rates
-----------
6 Mbps
9 Mbps
12 Mbps
18 Mbps
24 Mbps
36 Mbps
48 Mbps
54 Mbps
Access Point Profile RF Commands
281