D-Link DWS-4000 Series Cli Command Reference page 364

D-Link Unified Switch CLI Command Reference
Format
no max-total-octets
Mode Captive Portal Instance
session-timeout
This command configures the session timeout for a captive portal configuration. The <timeout> variable is a number that
represents the session timeout in seconds. Use 0 to indicate that the timeout is not enforced.
Default 0
Format
session-timeout <timeout>
Mode Captive Portal Instance
no session-timeout
Use this command to set the session timeout for a captive portal configuration to the default value.
Format
no session-timeout
Mode Captive Portal Instance
idle-timeout
This command configures the idle timeout for a captive portal configuration. The <timeout> variable is a number that
represents the idle timeout in seconds. Use 0 to indicate that the timeout is not enforced.
Default 0
Format
idle-timeout <timeout>
Mode Captive Portal Instance
no idle-timeout
Use this command to set the idle timeout for a captive portal configuration to the default value.
Format
no idle-timeout
Mode Captive Portal Instance
locale
This command is not intended to be a user command. The administrator must use the WEB user interface to create and
customize captive portal web content. The command is primarily used by the Unified Switch show running config
command and process as it provides the ability to save and restore configurations using a text-based format.
Format
locale <web-id>
Mode Captive Portal Instance
interface
This command associates an interface to a captive portal configuration or removes the interface captive portal association.
© 2009 D-Link Corporation. All Rights Reserved
356