D-Link DWS-4000 Series Cli Command Reference page 461

Example: The CLI command ip domain name yahoo.com will configure yahoo.com as a default domain name. For
an unqualified hostname xxx, a DNS query is made to find the IP address corresponding to xxx.yahoo.com.
no ip domain name
Use this command to remove the default domain name configured using the ip domain name command.
Format
no ip domain name
Mode Global Config
ip domain list
Use this command to define a list of default domain names to complete unqualified names. By default, the list is empty. Each
name must be no more than 256 characters, and should not include an initial period. The default domain name, configured
using the ip domain name command, is used only when the default domain name list is empty. A maximum of 32 names
can be entered in to this list.
Default none
Format
ip domain list <name>
Mode Global Config
no ip domain list
Use this command to delete a name from a list.
Format
no ip domain list <name>
Mode Global Config
ip name server
Use this command to configure the available name servers. Up to eight servers can be defined in one command or by using
multiple commands. The parameter <server-address> is a valid IPv4 or IPv6 address of the server. The preference of
the servers is determined by the order they were entered.
Format
ip name-server <server-address1> [server-address2...server-address8]
Mode Global Config
no ip name server
Use this command to remove a name server.
Format
no ip name-server [server-address1...server-address8]
Mode Global Config
DNS Client Commands
453