Basic Settings; Wireless Settings; Access Point Mode - D-Link NUCLIAS CONNECT DAP-2620 User Manual

Web User Interface
On the wireless settings page, you can setup the basic wireless configuration for the access point. The user can choose from 4 different wireless
modes:
y Access Point - Used to create a wireless LAN
y WDS with AP - Used to connect multiple wireless networks while still functioning as a wireless access point
y WDS - Used to connect multiple wireless networks
y Wireless Client - Used when the access point needs to act as a wireless network adapter for an Ethernet enabled device
Wireless Band
Click the drop-down menu to select the wireless
band, 2.4GHz or 5GHz.
Operation Mode Click the drop-down menu to select Access
Point.
Network Name (SSID)
Enter the name of Service Set Identifier (SSID)
up to 32 characters and is case-sensitive.
SSID Visibility Click the drop-down menu to enable or disable
broadcast the SSID across the network.
Auto Channel Selection Click the drop-down menu to enable
automatically selects the channel that provides
the best wireless performance. The channel
selection process only occurs when the AP is
booting up.
Channel Click the drop-down menu to select the desired
channel. The function is only available when
Auto Channel Selection is Disable.
Note: The wireless adapters will automatically
scan and match the wireless settings.
D-Link DAP-2620 User Manual

Basic Settings

Wireless Settings

Access Point Mode

12