Access Point Mode - D-Link DAP-1360 User Manual

DAP-1360 Wireless N300 Access Point & Router
User Manual

Access Point Mode

The Home / Information page displays general information on the access point and its software.
Figure 21. The general information page in the access point mode.
From the page you can quickly get to some pages of the web-based interface.
To upgrade the firmware of the access point, left-click the current firmware version (the right
column of the Firmware version line). After clicking the line, the System / Firmware
upgrade page opens (for the detailed description of the page, see the Firmware Upgrade section,
page 83).
To contact the technical support group (to send an e-mail), left-click the support e-mail address (the
right column of the Support line). After clicking the line, the e-mail client window for sending a
new letter to the specified address opens.
To edit the access point's local interface parameters, left-click the IP or MAC address of the local
interface (the right column of the LAN IP line or LAN MAC line correspondingly). After clicking
the line, the page for editing the LAN interface opens (for the detailed description of the page, see
the LAN section, page 48).
To configure the access point's WLAN parameters, left-click the SSID of the WLAN (the right
column of the SSID line). After clicking the line, the Wi-Fi / Basic settings page opens (for the
detailed description of the page, see the Basic Settings section, page 51).
To configure security settings of the WLAN, left-click the network authentication type (the right
column of the Security line). After clicking the line, the Wi-Fi / Security settings page opens
(for the detailed description of the page, see the Security Settings section, page 53).
Page 30 of 270
Installation and Connection