Wireless; Access Point Mode - D-Link NUCLIAS CONNECT DAP-2610 Manual

Hide thumbs Also See for NUCLIAS CONNECT DAP-2610:

Table of Contents

D-Link DAP-2610 User Manual

On the wireless settings page, you can setup the basic wireless configuration for the access point. The user can choose from 4 different wireless

modes:

Access Point - Used to create a wireless LAN

WDS with AP - Used to connect multiple wireless networks while still functioning as a wireless access point

WDS - Used to connect multiple wireless networks

Wireless Client - Used when the access point needs to act as a wireless network adapter for an Ethernet-enabled device

Select either 2.4 GHz or 5 GHz from the drop-down

Wireless Band:

menu.

Mode:

Select Access Point from the drop-down menu.

Network Name (SSID):

Service Set Identifier (SSID) is the name designated

for a specific wireless local area network (WLAN).

The SSID's factory default setting is dlink. The SSID

can be easily changed to connect to an existing

wireless network or to establish a new wireless

network. The SSID can be up to 32 characters and

is case-sensitive.

SSID Visibility:

Select Enable to broadcast the SSID across the

network, thus making it visible to all network users.

Select Disable to hide the SSID from the network.

Auto Channel Selection:

This feature when enabled automatically selects

the channel that provides the best wireless

performance. The channel selection process only

occurs when the AP is booting up. To manually

select a channel, set this option to Disable and

select a channel from the drop-down menu.

Wireless

Table of Contents