Table of Contents
Advertisement
Section 3 - Configuration
On the wireless settings page, you can set up the basic wireless configuration for the access point. The user can choose from 4 different wireless
modes:
Access Point - Used to create a wireless LAN
WDS with AP - Used to connect multiple wireless networks while still functioning as a wireless access point
WDS - Used to connect multiple wireless networks
Select either 2.4 GHz or 5 GHz from the drop-down
Wireless Band:
menu.
Mode:
Select Access Point from the drop-down menu.
Network Name (SSID):
Service Set Identifier (SSID) is the name designated
for a specific wireless local area network (WLAN).
The SSID's factory default setting is dlink. The SSID
can be easily changed to connect to an existing
wireless network or to establish a new wireless
network. The SSID can be up to 32 characters and
is case-sensitive.
SSID Visibility:
Select Enable to broadcast the SSID across the
network, thus making it visible to all network users.
Select Disable to hide the SSID from the network.
Auto Channel Selection:
This feature when enabled automatically selects
the channel that provides the best wireless
performance. The channel selection process only
occurs when the AP is booting up. To manually
select a channel, set this option to Disable and
select a channel from the drop-down menu.
D-Link DAP-X2810 User Manual
Wireless
Access Point Mode
11
Advertisement
Table of Contents
