Hitachi Compute Blade 2000 User Manual page 302

 Operation for MegaRAID WebBIOS
For MegaRAID WebBIOS, you can set individual items by using the following keys.
Connect a mouse to the remote console before starting MegaRAID WebBIOS.
Key/mouse
Mouse
Mouse - left button
0 to 9
Ctrl
Del, Back Space
 Key operation for MegaRAID WebBIOS
This section describes how to operate the MegaRAID WebBIOS only with the
keyboard.
Operating MegaRAID WebBIOS with Keyboard
You can set the following items for MegaRAID WebBIOS using the keyboard.
Key
Tab
Shift + Tab *2
Enter, Space
[↑], [↓]
Shift
0 to 9
Del, Back Space
*1 The item selected by the cursor is encircled by the dotted line.
*2 Shift + Tab is to press the Tab key while pressing the Shift key.
It may be hard to find the cursor on some screens. In this
case, press the Tab key or Shift + Tab keys to move the
cursor so that you can see it, and then move the cursor to
the position to perform the operation.
Operation
Moves the mouse cursor.
- Selects an item that the mouse cursor is placed on.
- Moves the cursor to an item to which the mouse cursor
points.
- Selects a disk array or physical hard disk.
Enters numerical values.
Selects multiple disk arrays or hard disks.
Deletes an entered value.
Operation
Moves the cursor in order. *1
Moves the cursor in reverse order.
- Selects the item that the cursor is put on.
- Determines an item setting.
- Determines a disk array or physical hard disk.
- Selects a disk array or physical hard disk.
- Selects a setting value.
Selects multiple disk arrays or hard disks.
Inputs a numerical value.
Deletes an entered value.
251