Speed Dial; Station Speed Dial Numbers - Vodavi STARPLUS STSe Operation Manual

Speed Dial

Speed Dial

Station Speed Dial Numbers

Description
A keyset user can associate up to 20 frequently dialed numbers as Station Speed Numbers
(9000-9019). Telephone numbers can be up to 24 digits including pauses, flash commands,
pulse-to-tone switchover, and no-display characters. A pause is automatically inserted after a
flash. There are 100 speed locations (Station/System) available in STSe systems.
Operation
To use speed dial:
1. If an outside line was not specified in programming, one can be selected now or the
system assigns the line.
2. Press the SPEED button and dial speed bin location,
-or-
Press the preprogrammed speed bin button,
-or-
Use the Soft Key's SPD option and dial a speed bin location when in an idle condition.
To store speed dial numbers:
1. Press the SPEED button once.
2. Press an OUTSIDE LINE button or POOL button.
-or-
Select an outside line automatically by pressing the SPEED button again.
3. Dial the speed bin location.
4. Dial the desired telephone number and include these special codes:
TRANS -- Initiates a Pulse-To-Tone switchover.
HOLD -- Inserts a Pause.
FLASH -- Inserts a Flash into the speed number.
TRANS -- When used as the first entry in the speed bin, this inserts a no-display character
causing numbers stored in the bin not to appear on the digital telephone's display when
bin is accessed.
5. Press the SPEED button.
6. Replace the handset or press ON/OFF to end the speed bin programming.
STARPLUS STSe - Programming & Operations Manual
Many Centrex codes utilize a hook-flash followed by, in many cases, the digit
STSe
[ ] and or [#]. The allows programming of these codes as a part of system
or station speed dial sequences.
2-275
Features and Operation
August 2005