Time Period; Attendant Display - T-1 Alarms - Vodavi STARPLUS STSe Operation Manual

Starplus stse key systems

Hide thumbs Also See for STARPLUS STSe:

Table of Contents

T-1 Alarm Programming

Time Period

The Time Period option represents the length of time set for Minor and Major alarm

conditions to occur.

Programming Steps

1. Press the TIME PERIOD flexible button (FLASH 47, Button #15). Button #15 LED is lit

steady. The following message displays:

2. Enter a valid number (00-99) on the dial pad which represents the time period limit.

3. Press the HOLD button to save the entry. A confirmation tone sounds and the display

DEFAULT ... Time Period is set for five minutes.

The Attendant Display option determines whether the first Attendant station should be

notified of any T-1 alarm conditions when they occur.

Programming Steps

1. Press the ATENDANT DISPLAY flexible button (FLASH 47, Button #16). Button #16 LED is

lit steady. The following message displays:

2. Enter a valid number (0 or 1) on the dial pad.

[0] = No alarm

[1] = Alarm enabled

3. Press the HOLD button to save the entry. A confirmation tone sounds and the display

DEFAULT ... All alarm conditions are enabled to be sent to the first Attendant station LCD

The Attendant can dial feature code [606] to clear any T-1 alarm from the display. It will not

clear the condition, just clear the display.

STARPLUS STSe - Programming & Operations Manual

D ATA ER R O R S

T I ME P E RI O D 05

D ATA ER R O R S

AT T D I S PL AY EN A B L ED

Features and Operation

Show Quick Links

Table of Contents