Intercom Calling - Vodavi STARPLUS STSe Operation Manual

Intercom

Intercom Calling

Description
The system's architecture allows non-blocking of intercom calls. A station is reached on
intercom by dialing the associated station number.
Operation
To place an Intercom Call:
1. Press the DSS button of the party to be called (if programmed at your phone),
-or-
Dial the extension number.
(You hear ringing if the called station is in the T answering mode; or three bursts of tone if
called station is in the H or P position.)
2. Lift handset or use the speakerphone after the tone bursts stop.
3. Hang up to end the call.
To answer an Intercom Call:
In the T mode, you hear repeated bursts of intercom tone ringing and the HOLD button
slow flashes.
Lift the handset or press the ON/OFF button to answer,
-or-
Position the H-T-P switch to the H mode to reply.
In the P mode, you hear three bursts of tone and one-way announcement. The calling
party cannot hear conversations in progress.
Lift the handset or press the ON/OFF button to answer,
-or-
Position the H-T-P switch to the H mode to reply.
In the H mode, you hear three bursts of tone and an announcement.
Reply handsfree or lift the handset for privacy.
SINGLE LINE TELEPHONE
To place an intercom call:
1. Lift the handset.
2. Dial the intercom number.
You will hear ringing if the called station is in the "T" answering mode or two bursts of
tone if the called station is in the "H" or "P" modes.
3. Hang up to end the call.
STARPLUS STSe - Programming & Operations Manual
Dialing a number in the numbering plan activates the telephone
automatically.
2-187
Features and Operation
August 2005