Vodavi STARPLUS STSe Operation Manual page 101

CO Line - Identification
2. Enter a valid number for the range of lines being programmed. If only one line is being
programmed, enter that number twice (001 001).
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 (Page A) is lit. The following message displays to indicate current
programming of that line or group of lines:
4. Press the CO LINE IDENTIFICATION flexible button (Button #11). The following displays:
5. Enter the name by using keys on the dial pad as follows. Valid alphanumeric characters
are: [A-Z], [0-9], [ ], [#], [-], [spaces] and other ASCII characters as listed in
Any combination up to 12 characters may be entered (this represents 24 digits entered).
6. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
STARPLUS STSe - Programming & Operations Manual
If HOLD is pressed without entering a CO line range, all CO lines are selected.
XXX - XXX PAGE A
E N T E R B U T TO N N U MBE R
XXX-XXX = CO Line Range
L I N E I DE N T I F I C AT I O N
L I N E 0 01
1 = 1#
2 = 2#
3 = 3#
4 = 4#
5 = 5#
6 = 6#
7 = 7#
Figure 2-3: Dial Pad Keys
If an error is made while entering digits, press HOLD to save the erroneous
entry. Key in digits over the old name; if excess characters remain, use the digits
[11] to transpose spaces over the undesired characters.
Other Codes
8 = 8# " = 01
9 = 9# , = 02
0 = 0# ? = 03
Space = 11 / = 04
: = 12 ! = *1
- = 13 $ = *2
' = 14 & = *4
2-77
Features and Operation
Figure 2-3.
* = *#
( = #1
) = #2
+ = #3
= = #4
# = ##
. = 24
August 2005