Vodavi STARPLUS STSe Operation Manual page 103

CO Line - Incoming Ringing Assignment
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 (Page A) is lit. The following message displays to indicate current
programming of that line or group of lines:
4. Press the RING ASSIGNMENT flexible button (Button #10). The display shows the
following information:
5. Enter a valid Destination (DDD) or (DDDD) and Ring type (R) followed by the HOLD
button. A confirmation tone sounds and the display updates.
Valid 3- and 4-Digit Destinations (DDD) and (DDDD)
9020-9099
System Speed Bins [
Flexible Extension Numbers*
Flexible Numbers for Voice Mail Groups 1–8*
Flexible Numbers for Hunt Groups 1–8*
Flexible Numbers for Direct Ringing to Modem*
Flexible Numbers for UCD Groups 1–16*
* Internal flexible numbers range = 100-8999
STARPLUS STSe - Programming & Operations Manual
XXX - XXX PAGE A
E N T E R B U T TO N N U MBE R
XXX-XXX = CO Line Range
R I NG AS S I G NM EN TS
E N T E R D DD R
The actual LCD displays a 3-digit destination field (DDD), but both a
3- or 4-digit entry is possible.
Table 2-5: CO Line Ringing Assignments
], for Off-Net Ringing
Valid Ring Types (R)
[0] = No Ring; unassigned; or to delete a destination
[1] = Day Ring [D]
[2] = Night Ring [N]
[3] = Day/Night Ring [DN]
[4] = Special Only [S]
[5] = Day/Special [DS]
[6] = Night/Special [NS]
[7] = All Modes [Day/Night/Special [A]
2-79
Features and Operation
August 2005