Print Hunt Group Parameters; Idle Speaker Mode - Vodavi STARPLUS STSe Operation Manual

Idle Speaker Mode

Print Hunt Group Parameters

Description
The Print Hunt Group command dumps the entire database as a permanent record which can
serve as a hardcopy of the database. The system baud rate must match that of the printer or
receiving device.
HUNT GROUPS
-----------
HG 0..450
HG 1..451
HG 2..452
HG 3..453
HG 4..454
HG 5..455
HG 6..456
HG 7..457
Programming Steps
1. Press the HUNT GROUPS flexible button (FLASH 85, Button #11). The following message
displays:
2. To print data for Hunt Group Parameters, press the HOLD button. The following message
displays:
When the system finishes sending the requested information to the printer, a
confirmation tone sounds.
Idle Speaker Mode
Description
The Idle Speaker Mode feature allows you to select whether the first digit dialed is audible
over the digital telephone speaker. This feature is allowed or denied on a system-wide basis
in programming.
STARPLUS STSe - Programming & Operations Manual
PILOT RING ONE
PILOT RING ONE
PILOT RING ONE
PILOT RING ONE
PILOT RING ONE
PILOT RING ONE
PILOT RING ONE
PILOT RING ONE
Figure 2-11: Hunt Group Parameters Printout
P R I NT H U NT G R O U P
P R ES S HOL D
P R I NT IN G H U NT G R O U P
When this feature is enabled, there can be some idle speaker noise.
RAN HUNT GROUPS
---------------
HG 8..458 PILOT RING ONE
HG 9..459 PILOT RING ONE
HG10..460 PILOT RING ONE
HG11..461 PILOT RING ONE
2-183
Features and Operation
August 2005