Isdn Programming - Page B - Vodavi STARPLUS STSe Operation Manual

Starplus stse key systems

Hide thumbs Also See for STARPLUS STSe:

Table of Contents

Features and Operation

ISDN Programming - Page B

When entering the ISDN attributes portion of the database, the programmer may decide to

enter information for a range of slots or for one specific slot. Range programming lets the

programmer change a specific parameter or a few parameters for an entire range of slots,

leaving intact the remaining data fields that do not require change. Those data fields

continue to operate with the previously programmed data.

Programming Steps

1. Press FLASH and dial [45]. The following message displays:

2. Enter a valid number for the range of slots being programmed. If only one slot is being

programmed, enter that number twice (02 02 = Slot 2).

3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.

Flexible button #19 (Page A) is lit.

4. Press button #20 to select Page B. The following message displays to indicate current

programming of that slot or group of slots:

STARPLUS STSe - Programming & Operations Manual

IMPORTANT --

These timers should not be adjusted UNLESS working with Technical Support or your

telephone company.

I S D N AT T R I B U T E S

S E L EC T A S LOT R A N GE

Y Y - Y Y PAG E B

E N T E R B U T TO N N U MBE R

YY = Slot (0-13)

ISDN Programming - Page B

Show Quick Links

Table of Contents