Print Did-Tie Parameters - Vodavi STARPLUS STSe Operation Manual

Starplus stse key systems

Hide thumbs Also See for STARPLUS STSe:

Table of Contents

Features and Operation

Print DID-TIE Parameters

The Print DID-TIE command dumps the entire database as a permanent record which can

serve as a hard copy of the database. The system baud rate must match that of the printer or

receiving device.

When printing the DID-TIE Timers, the following data is printed:

DID Parameters and Timers

TIE Line Parameters and Timers

DID SIGNALING - WINK

DID DIGITS - 3

TIE SIGNALING - WINK

DID INC SIGNALING - DTMF

TIE INC SIGNALING - DTMF

T1 INC SIGNALING - DTMF

Programming Steps

1. Press the DID-TIE PARAMETERS flexible button (FLASH 85, Button #14). The following

message displays:

2. To print the DID-TIE Parameters, press the HOLD button. The following message displays:

When the system has finished sending the requested information to the printer,

confirmation tone sounds.

STARPLUS STSe - Programming & Operations Manual

Figure 2-6: DID-TIE Parameters Printout

P R I NT D I D / T IE T M RS

P R ES S H O L D

P R I NT IN G DI D /T I E TM RS

Direct Inward Dialing

Show Quick Links

Table of Contents