Vodavi STARPLUS STSe Operation Manual page 198

2-174
Features and Operation
Programming Steps
1. Press FLASH and dial [50] or dial [51]. Flexible button #24 (New Range) is lit and one of
the following messages displays:
Flash 50 - Fixed Numbers
S TATI O N AT T R IB U T E S
S EL E C T A S TAT I O N R A N GE
2. Enter the range of fixed station numbers (100-149) to be programmed. If only one station
is being programmed, enter that number twice, e.g., [100 100].
-or-
Enter a valid flexible number (100-8999) to be programmed.
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 is lit. The display updates to reflect current programming for Page A:
Flash 50 - Fixed Numbers
XXX - XXX PAGE A
E NT ER B U T TO N NUMB ER
XXX-XXX = fixed station range
4. Press button #20. The display updates to reflect current programming for Page B.
Flash 50 - Fixed Numbers
XXX - XXX PAGE B
E NT ER B U T TO N NUMB ER
XXX-XXX = fixed station range
5. Press the DISPLAY BUTTONS flexible button (Button #18) to display programming
assignments. The following message displays:
6. Dial a valid option number (0 or 1) to identify the location where you plug the headset
into the STSe keyset.
STARPLUS STSe - Programming & Operations Manual
If HOLD is pressed without entering a station range, all stations are selected.
H E AD S E T MO DE
2.5 MM JACK
0 = plugged into the jack normally used for the handset
1 = plugged into the 2.5 mm jack located on the left side of the keyset
Flash 51 - Flexible Numbers
EN TE R S TAT I O N N U MBE R
Flash 51 - Flexible Numbers
S XXX PAG E A
EN TE R B UT TO N N U MBE R
XXX = 3- or 4-digit flexible number
Flash 51 - Flexible Numbers
S XXX PAG E B
EN TE R B UT TO N N U MBE R
XXX = 3- or 4-digit flexible number
0-1
Headset Mode
August 2005