Display Ring Assignments - Vodavi STARPLUS STSe Operation Manual

CO Line - Incoming Ringing Assignment

Display Ring Assignments

Description
Programming Steps
1. Press FLASH and dial [40]. The following message displays:
2. Enter a valid number for the range of lines being programmed. If only one line is being
programmed, enter that number twice (001 001).
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 (Page A) is lit. The following message displays to indicate current
programming of that line or group of lines:
4. Press Button #13 to display ring assignments. Assignments are displayed in sets of six, up
to the number programmed. The following format displays the assignments.
5. Press Button #13 additional times to cycle to the next group of six ring assignments. Ring
assignments are displayed in numerical order, from the lowest to the highest number.
STARPLUS STSe - Programming & Operations Manual
CO L I N E AT T R I B U T E S
S E L EC T A CO L I NE R A NG E
If HOLD is pressed without entering a CO line range, all CO lines are selected.
XXX - XXX PAGE A
E N T E R B U T TO N N U MBE R
XXX-XXX = CO Line Range
X D DD D R R X D D D DR R X DD D D RR
X D DD D R R X D D D DR R X DD D D RR
XDDDD = Destination type ID letter followed by number to be dialed:
[F]] plus Fixed Number, e.g., F102
[H] plus Hunt Group Number, e.g., H6700
[M] plus Modem Extension Number, e.g., M6099 (default = M499N)
[S] plus Station Number, e.g., S6002
[U] plus UCD Group/Agent Number, e.g., U6034
[V] plus Voice Mail Group Number, e.g., V6899
[B] plus Speed Bin Number, e.g., B9090
RR:
[0] = No Ring
[D] = Day Ring
[N] = Night Ring
[DN] = Day/Night Ring
[S] = Special Only
[DS] = Day/Special
[NS] = Night/Special
[A] = All Modes (Day/Night/Special)
2-81
Features and Operation
August 2005