Paging Zone(S) - Vodavi STARPLUS STSe Operation Manual

2-246
Features and Operation

Paging Zone(s)

Description
Stations are assigned to Page Zones. At least one station must be assigned to a Zone for that
Zone to be active. Stations can be in any combination of the 20 zones or in none of the zones.
Use Flash 50 programming when you want to modify a range of stations' attributes using
fixed station numbers.
Use Flash 51 programming to modify a single station's attributes using a flexible station
number.
Programming Steps
1. Press FLASH and dial [50] or dial [51]. Flexible button #24 (New Range) is lit and one of
the following messages displays:
Flash 50 - Fixed Numbers
S TATI O N AT T R IB U T E S
S EL E C T A S TAT I O N R A N GE
2. Enter the range of fixed station numbers (100-149) to be programmed. If only one station
is being programmed, enter that number twice, e.g., [100 100].
-or-
Enter a valid flexible number (100-8999) to be programmed.
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 is lit. The display updates to reflect current programming for Page A:
Flash 50 - Fixed Numbers
XXX - XXX PAGE A
E NT ER B U T TO N NUMB ER
XXX-XXX = fixed station range
4. Press button #20. The display updates to reflect current programming for Page B.
Flash 50 - Fixed Numbers
XXX - XXX PAGE B
E NT ER B U T TO N NUMB ER
XXX-XXX = fixed station range
STARPLUS STSe - Programming & Operations Manual
If HOLD is pressed without entering a station range, all stations are selected.
Flash 51 - Flexible Numbers
EN TE R S TAT I O N N U MBE R
Flash 51 - Flexible Numbers
S XXX PAG E A
EN TE R B UT TO N N U MBE R
XXX = 3- or 4-digit flexible number
Flash 51 - Flexible Numbers
S XXX PAG E B
EN TE R B UT TO N N U MBE R
XXX = 3- or 4-digit flexible number
Paging
August 2005