Attendant Speed Dial - System Storing - Vodavi Starplus STSe User Manual
Station
Hide thumbs
Also See for Starplus STSe:
- User manual (116 pages) ,
- Operation manual (624 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
14
Attendant Speed Dial - System Storing
System Speed numbers must be entered by the first programmed
Attendant. If an Attendant is not specified, enter at Station 100.
1.
Press SPEED, then press the desired outside line key,
-or-
Press SPEED + SPEED to select an outside line automatically.
2.
Dial the System Speed bin location (9020-9099).
3.
Dial telephone number, press SPEED, then hang up.
Speed Dial Options
To use the following speed dial options, enter as shown:
Initiate a Pulse-To-Tone
Switchover
Insert a Pause
Insert a Flash into Speed Number Press FLASH.
Insert a Non-Display Character
NOTE ... Speed Bin numbers 9060-9099 are not monitored by Toll Restriction.
STSe Station User Guide
Press TRANS during number entry.
Press HOLD during number entry.
Press TRANS as first entry in speed bin.
This causes the numbers stored in the
bin not to display on the Digital
Telephones when the bin is accessed.
Attendant Features
August 2008
Advertisement
Table of Contents
