Remote Programming & Maintenance Connection - Vodavi STARPLUS STSe Operation Manual

Programming the Voice Mail System
Remote Programming & Maintenance Connection
STSe Site
1. Lift the cover of the STSe unit to access the programming port.
2. Connect a null cable to the RS-232 port #2 (9600 baud by default) on the outside of the
KSU cabinet, then plug the other end into the programming port of the Flash-based Voice
Mail card.
3. Enter admin programming, access FLASH 67, Button #6, and set the VM port to enabled
(default = disabled).
4. Set the ring assignment for the line chosen for external voice mail to ring 498, which is
the VM modem.
Remote Site
A laptop or standard PC desktop system can be used. No special software is required. Any
communications package that supports ANSI terminal emulation will work (e.g.,
HyperTerminal or ECOM). The required port speed is 9600 BAUD.
If HyperTerminal is the communications package to be used, after opening HyperTerminal
and the New Connection screen displays, perform the following steps:
1. Type the desired name for your connection, select the desired icon, then click on OK.
2. When the "Connect To" window displays, type in the area code and telephone number for
the line chosen for the external voice mail, change the setting in the "Connect using" box
to: COM1 or COM2 (as required by your PC), then click on OK.
3. After the connection is established, type in the Voice Mail Password.
STARPLUS STSe - Programming & Operations Manual
The cable between the Flash-based Voice Mail card and the KSU must be a null cable.
C-43
Flash-Based Voice Mail
August 2005