Attendant Speed Dial - System Storing - Vodavi Starplus STS User Manual

Attendant Features

Attendant Speed Dial - System Storing

System Speed numbers must be entered by the first
programmed Attendant. If an Attendant is not specified, enter
at Station 100.
1. Press SPEED once, then press the desired outside line key,
-or-
Press SPEED twice to select an outside line automatically.
2. Dial the System Speed bin location (9020-9099).
3. Dial telephone number.
4. Press SPEED.
5. Hang up.
Speed Dial Options
To use the following speed dial options, enter as shown:
Initiate a Pulse-To-Tone
Switchover
Insert a Pause
Insert a Flash into the
Speed Number
Insert a Non-Display
Character
Speed Bin numbers 9060-9099 are not monitored by
Toll Restriction.
Press TRANS during number entry.
Press HOLD during number entry.
Press FLASH.
Press TRANS as the first entry in the
speed bin.
This causes the numbers stored in the
bin not to display on the Digital
Telephones when the bin is accessed.
15