Single Line Telephone; Compatibility; Slt Dtmf Receiver Timer - Vodavi STARPLUS STSe Operation Manual

Starplus stse key systems
Hide thumbs Also See for STARPLUS STSe:
Table of Contents

Advertisement

2-270
Features and Operation
Conditions
»
A station can be assigned as an Administrator or as a Classroom, but not as both.
»
A call from an Administrator station to a Classroom station overrides any School Zone call
forward settings and the call rings at the Classroom station.
»
School Zone call forwarding overrides station user call forwarding and DND.
»
If an E-911 button is programmed, both audible and visual alert indications will be
provided, regardless of School Zone call forward settings.
»
The School Zone call forwarding feature does not apply to a Classroom station that is in a
hunt group or a UCD group.

Single Line Telephone

Compatibility

Description
The STSe supports industry standard 2500-type (DTMF) single line telephone (SLT)
instruments. When the Circuit Single Line Interface Board (CSIB) is installed in the STSe, a
maximum of 24 single telephones can be supported.

SLT DTMF Receiver Timer

Description
Single line telephones require the use of a DTMF receiver when going off-hook and dialing.
When SMDR or toll restriction (via COS assignments) is enabled, a DTMF receiver monitors
and screens the SLT digits for the duration of this timer. By adjusting this timer, the system
administrator may free system DTMF receivers sooner if system SLT traffic is heavy, or provide
a longer monitoring period if toll restriction becomes a problem.
Note that when LCR is enabled, the DTMF receivers are released when the expected number
of digits are dialed as entered in the LCR database.
The SLT DTMF Receiver Timer setting is variable from 005-100 seconds.
Programming Steps
1. Press the SLT DTMF RECEIVER TIMER flexible button (FLASH 01, Button #12). The
following message displays:
2. Enter a valid number that corresponds to 005–100 seconds.
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT ... SLT DTMF Receiver Timer is set at 20 seconds.
STARPLUS STSe - Programming & Operations Manual
S LT R CV R T I ME R
0 2 0
Single Line Telephone
005-100
August 2005

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents