A-8
ICLID / Caller ID
Baud Rate Display
Description
The STSe system can provide ICLID input on the standard RS-232C of the BKSU (also on
LCOB w/CIDU. The baud rate is displayed as 150, 300, 600, 1200, 2400, 4800, 9600, or 19.2K
baud.
Programming Steps
The ICLID baud rate is programmed using FLASH 15 Baud Rate assignments. The LCD
displays the current baud rate based on which number is assigned to the ICLID Port number.
DEFAULT ... Baud Rate is 9600.
Port Assignment
Programming Steps
1. Press the PORT flexible button (FLASH 56, Button #4) to specify which port to use for
ICLID information.
2. Enter a valid number for one of the ICLID Ports:
[1] = Port #1 (RS-232C on BKSU)
[2] = Port #2 (RS-232C on BKSU)
(LCD displays current baud rate assigned to the ICLID Port number.)
3. Press HOLD to accept the data. A confirmation tone sounds and the display updates.
DEFAULT ... Port #1.
STARPLUS STSe - Programming & Operations Manual
When FLASH 56, Button #3 is pressed, an error tone is received.
Baud rate does not apply to the CIDU.
Use Port 1 or 2 for ICLID. Port 3 is the modem port.
I C L I D NA M E B AU D P O R T
N O
Y ES
9 6 00
1
ICLID Programming
August 2005