Vodavi STARPLUS STSe Operation Manual page 116

2-92
Features and Operation
4. Press the QUEUING flexible button (Button #7). The following message displays:
5. Enter a 0 or 1 on the dial pad to enable/disable this feature.
[0] = Disabled
[1] = Enabled
6. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT ... CO Line Queuing is enabled at all stations.
Operation
If you wish to be placed on a list waiting for an outside line to become available:
1. Press desired busy OUTSIDE LINE button,
-or-
Press the POOL button. (Busy tone sounds.)
2. Press the preprogrammed CO LINE QUEUE button (621).
3. Replace handset or press ON/OFF button.
To answer a queue:
If you hear ringing and an outside line of the line group or a LOOP button you queued onto is
rapidly flashing:
1. Lift handset or press ON/OFF button.
2. Press flashing OUTSIDE LINE button or LOOP button to answer.
SINGLE LINE TELEPHONE
1. Dial outside line access code. Receive busy tone.
2. Press the FLASH button.
3. Dial [621]. Confirmation tone sounds.
Conditions
»
A LOOP button or direct appearance of the queued line is required.
»
Only one station at a time can be programmed when using a flexible station number.
»
When in Flash 51 programming, if you press HOLD without specifying a flexible number
to be programmed, you will get the station that is in port/station 100.
STARPLUS STSe - Programming & Operations Manual
L I N E Q U E UI N G
E N AB LE D
CO Line - Queue
0-1
August 2005