Vodavi STARPLUS STSe Operation Manual page 50

2-26
Features and Operation
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 is lit. The display updates to reflect current programming for Page A:
Flash 50 - Fixed Numbers
XXX - XXX PAGE A
E NT ER B U T TO N NUMB ER
XXX-XXX = fixed station range
4. Press the CALL FORWARD flexible button (Button #10). The following message displays:
5. Enter a 0 or 1 on the dial pad to enable/disable this feature.
[0] = Disabled
[1] = Enabled
6. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT ...Call Forwarding is enabled at all stations.
Conditions
»
Only one station at a time can be programmed when using a flexible station number.
»
When in Flash 51 programming, if you press HOLD without specifying a flexible number
to be programmed, you will get the station that is in port/station 100.
»
Call Forward remains engaged until manually released. When released, the station
number is returned to the LCD.
»
Calls cannot be forwarded to a station in the DND mode.
»
CO Line queues, a Message Waiting request, and pre-selected messages are canceled
when a station is placed in the Forward mode.
»
A Forwarded Call signals to the forwarded station in the Tone mode, regardless of the
Intercom Signaling Switch mode selection.
»
A station in the Forward mode can make outgoing calls.
»
A station denied the use of Call Forwarding receives an error tone when pressing the
CALL FORWARD button.
»
If a CO Line rings into a station with manual Call Forward, the line sequences to the last
station of the chain. If the last station is in DND mode or does not have a Direct
appearance for the CO Line or a Loop button, the call reverts back to the first station.
»
If a CO Line rings into a station with both Station and Preset Call Forwarding, Station Call
Forwarding takes precedence. Once the Station Forward determines the station to be
rung as per above, preset Call Forward may then apply at the new station.
»
An unlimited number of stations can be set up in a Station Call Forward chain. However, a
station cannot forward to a station that is already a member of their chain.
STARPLUS STSe - Programming & Operations Manual
S XXX
EN TE R B UT TO N N U MBE R
XXX = 3- or 4-digit flexible number
C A LL FO R WA RD
E N AB LE D
Flash 51 - Flexible Numbers
PAG E A
0-1
Call Forward
August 2005