Recall; Attendant Recall Timer; Release Button - Vodavi STARPLUS STSe Operation Manual

3-24
Attendant Features and Operation

Recall

Description
A held CO call left unattended by a station recalls the Attendant(s) after a programmable
time period elapses. A recalling CO line flashes at a distinctive rate and has an LCD display
that identifies the originating station of the unanswered call.
Operation
To answer a recall, press OUTSIDE LINE button that is flashing at a very fast rate.
Conditions
»
Recall does not apply to intercom calls placed on hold.

Attendant Recall Timer

Description
The Attendant Recall Timer determines the time a recalling call rings at the Attendant
station(s) before the system releases the line. When a CO Line recalls to the Attendant station
and is still unanswered, the system releases the line at the expiration of this timer and
automatically places the line to an idle condition.
The Attendant Recall Timer setting is variable from 00–60 minutes. An entry of 00 causes the
Attendant(s) station to ring until answered.
Programming Steps
1. Press the ATTENDANT RECALL TIMER flexible button (FLASH 01, Button #3). The
following message displays:
2. Enter a valid number on the dial pad that corresponds to 00-60 minutes.
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT ... Attendant Recall Timer is set for 1 minute.

Release Button

Description
The Release Button feature lets the station user disconnect calls while off-hook (on handset,
not speakerphone), speeding up call handling time. While off-hook (on handset, not
speakerphone) on an intercom call, transfer sequence, page announcement, or CO call:
Press the preprogrammed RELEASE button [641] to terminate intercom call, transfer
sequence, page announcement or CO call.
STARPLUS STSe - Programming & Operations Manual
AT ND RE C A L L T I M ER
0 1
00-60
Recall
August 2005