Vodavi STARPLUS STSe Operation Manual page 455

Programming LCR Tables
2. Enter the range of fixed station numbers (100-351) to be programmed. If only one station
is being programmed, enter that number twice, e.g., [100 100].
-or-
Enter a valid flexible number (100-8999) to be programmed.
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 is lit. The display updates to reflect current programming for Page A:
Flash 50 - Fixed Numbers
XXX - XXX PAGE A
E NT ER B U T TO N NUMB ER
XXX-XXX = fixed station range
4. Press button #20. The display updates to reflect current programming for Page B.
Flash 50 - Fixed Numbers
XXX - XXX PAGE B
E NT ER B U T TO N NUMB ER
XXX-XXX = fixed station range
5. Press the LCR COS flexible button (Button #9). The following message displays:
6. Enter a valid number (0–6) to correspond to the LCR Class of Service desired.
7. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Conditions
»
Only one station at a time can be programmed when using a flexible station number.
»
When in Flash 51 programming, if you press HOLD without specifying a flexible number
to be programmed, you will get the station that is in port/station 100.
STARPLUS STSe - Programming & Operations Manual
If HOLD is pressed without entering a station range, ALL stations are selected.
LCR C L A S S O F S ER V I C E
0
Appendix B - Least Cost Routing
Flash 51 - Flexible Numbers
S XXX PAG E A
EN TE R B UT TO N N U MBE R
XXX = 3- or 4-digit flexible number
Flash 51 - Flexible Numbers
S XXX PAG E B
EN TE R B UT TO N N U MBE R
XXX = 3- or 4-digit flexible number
0-6
B-17
August 2005