Call Back Button Flash Rate; Automatic Call Back Timer - Vodavi STARPLUS STSe Operation Manual

Call Back

Call Back Button Flash Rate

Description
The Call Back Button flash rate is the rate at which the Call Back button flashes when a station
at which you left a call back request becomes available. This flash rate can be programmed to
29 different options identified in the flash rate table. This enables the programmer to
customize the key system configuration to desired flash rates.
Programming Steps
1. Press the CALL BACK BTN flexible button (FLASH 07, Button #16). The following displays:
2. Enter a valid number (00-28) on the dial pad to correspond to one of the 29 available
options (refer to
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT ... Call Back Button flash rate is set for a Red 120 ipm Flash (10).

Automatic Call Back Timer

Description
The Automatic Call Back Timer invokes a call back anytime a user listens to a busy tone for a
programmable period of time. The Automatic Call Back Timer can be set to 00-99 seconds.
Value 00 disables the timer. An Automatic Call Back does not occur when timer is disabled.
Programming Steps
1. Press the AUTO CALL BACK TIMER flexible button (FLASH 01, Button #17). The following
message displays:
2. Enter a valid number on the dial pad that corresponds to 00-99 seconds in 1-second
increments.
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT ... Automatic Call Back Timer is set for 10 seconds (enabled).
STARPLUS STSe - Programming & Operations Manual
C A LL BACK BT N
R E D 1 2 0 I P M F L A S H
Table 2-16 on page 2-163).
AUTO C A L L B AC K
1 0
Features and Operation
00-28
00-99
2-21
August 2005