Preset Call Forward - Co Line - Vodavi STARPLUS STSe Operation Manual

Call Forward - Preset
Internal DND Destination
1. Press Button #22 to access Flash 50/51, Page D programming, then press Button #3. The
following message displays:
2. Enter a valid flexible destination number (if a 3-digit number, add a leading 0) and press
HOLD.
3. To delete the entry, press the [#] key and then press HOLD.
External DND Destination
1. Press Button #22 to access Flash 50/51, Page D programming (if necessary), then press
Button #4. The following message displays:
2. Enter a valid flexible destination number (if a 3-digit number, add a leading 0) and press
HOLD.
3. To delete the entry, press the [#] key and then press HOLD.
Conditions
»
The No Answer Timer controls both Manual and Preset Forwarding (feature code 640
forwarding and FLASH 50, Page C, Buttons #1-4 and 14-17.
»
Station Forwarding overrides the Preset Forward settings.
»
Only one station at a time can be programmed when using a flexible station number.
»
When in Flash 51 programming, if you press HOLD without specifying a flexible number
to be programmed, you will get the station that is in port/station 100.

Preset Call Forward - CO Line

Description
The Preset Call Forward Destination feature enables a CO line to initially ring at multiple
stations and forward to a pre-determined destination. The destination can be a station
(DKT-SLT), Voice Mailbox, UCD group, or Hunt group. Each CO line has a Preset Forward
Timer. Each CO line also has a VMID field to allow sending of specific VM digits when a CO line
forwards to a VM group. Calls ringing into UCD Groups or Voice Mail Groups continue to ring
the group. The CO line does not forward when ringing one of these types of groups.
STARPLUS STSe - Programming & Operations Manual
I N T E R NA L D N D F W D
# ## #
E X T E R NA L D N D F W D
# ## #
2-39
Features and Operation
August 2005