Distinctive Ringing; Co Line Distinctive Ring Tone - Vodavi STARPLUS STSe Operation Manual

Distinctive Ringing

EXAMPLE -- To search for the name BROWN, press [2][7][6][9][6].
When the system finds a unique numeric match to the name being dialed, the call is
placed to the station matching the name.
The intercom call signals the station according to the H-T-P button.
If fewer than 8 digits are dialed, the numeric match is dialed after a 10-second
interdigit time-out occurs, or if [#] is pressed.
Conditions
»
The system dials the station that matches the dialed name when a unique match is found.
If multiple names are located (found) after eight digits, the first one is dialed.
»
Names are entered as part of the system attributes database. Numbers may be entered as
part of a name. To avoid conflicts, all names must have a unique numerical sequence.
Distinctive Ringing

CO Line Distinctive Ring Tone

Description
The ring tone signal used to notify stations of an incoming call can be changed in
administrative programming to provide distinctive ringing on a per CO line basis. A
distinctive ring tone can be programmed for each CO line that is used to ring each station.
The system provides 36 different ring tones that can be selected for each CO line in the
system.
Programming Steps
1. Press FLASH and dial [40]. The following message displays:
2. Enter a valid number for the range of lines being programmed. If only one line is being
programmed, enter that number twice (001 001).
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible Button #19 (Page A) is lit.
STARPLUS STSe - Programming & Operations Manual
CO Line Distinctive Ring Tone overrides station distinctive ring tone.
CO L I N E AT T R I B U T E S
S E L EC T A CO L I NE R A NG E
If HOLD is pressed without entering a CO line range, all CO lines are selected.
2-141
Features and Operation
August 2005