Station Night Class Of Service - Vodavi STARPLUS STSe Operation Manual

2-64
Features and Operation
5. Press the DAY COS flexible button (Button #2).
6. Enter a valid number on the dial pad (1-7) corresponding to one of seven possible Classes
of Service to which a station may be assigned.
The seven classes of service are:
[1] = COS 1; No restrictions
[2] = COS 2; Table A governs
[3] = COS 3; Table B governs
[4] = COS 4; Table A and B govern
[5] = COS 5; Restricts [0], [1], [ ], [#] dialed as first-digit with a 7-digit maximum
[6] = COS 6; Intercom Only (no CO line access - results in a 911 block
[7] = COS 7; Restricts [0], [1], [ ], [#] dialed as first-digit with a 10-digit maximum
7. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT ... All stations are assigned a COS 1 for Day Mode.
Conditions
»
Only one station at a time can be programmed when using a flexible station number.
»
When in Flash 51 programming, if you press HOLD without specifying a flexible number
to be programmed, you will get the station that is in port/station 100.

Station Night Class of Service

Description
Each station must be assigned a COS for Night Mode operation. The Night COS goes into
affect when the system is manually or automatically placed into Night Mode. This prevents
misuse of phones after hours. Class of Service determines the station's dialing privileges.
Use Flash 50 programming when you want to modify a range of stations' attributes using
fixed station numbers.
Use Flash 51 programming to modify a single station's attributes using a flexible station
number.
Programming Steps
1. Press FLASH and dial [50] or dial [51]. Flexible button #24 (New Range) is lit and one of
the following messages displays:
Flash 50 - Fixed Numbers
S TATI O N AT T R IB U T E S
S EL E C T A S TAT I O N R A N GE
STARPLUS STSe - Programming & Operations Manual
DAY COS
1
unless 911 Feature is active)
1-7
Flash 51 - Flexible Numbers
EN TE R S TAT I O N N U MBE R
Class Of Service
August 2005