Special Table - Vodavi STARPLUS STSe Operation Manual

Starplus stse key systems
Hide thumbs Also See for STARPLUS STSe:
Table of Contents

Advertisement

2-324
Features and Operation

Special Table

Description
The Special Tables provide greater flexibility in designing a toll plan for a particular site.
Each Special Table allows entry of up to 800 office codes (200–999).
Three of these tables must be assigned an area code by which they are referenced. The
fourth table is reserved for the home area code and requires no area code entry.
The Special Tables are referenced through entries in the allow tables. Four area codes,
including the home area code, can be referenced to these special tables for further
definition. When a Special Table is referenced, entries must be made in the Special Table
specifying what office codes are allowed.
Codes can be added to the Allow list or removed from the list. When a Special Table is
checked for a match to a 3-digit code and not found, the system continues to search the
next Allow/Deny Table to be checked. The system does not return to the Allow Table
which routed the call to the Special Table.
Programming Steps
To program a special table:
(The area code must first be assigned to the table, except for the home area code.)
1. Press the appropriate AREA CODE TABLE (#1 to #3) flexible button (FLASH 70,
Buttons #9 to #11). The following message displays:
2. Enter a valid area code.
3. Press the HOLD button to save the entry. A confirmation tone sounds and the display
updates.
To enter office codes in a special table:
1. Press the SPECIAL TABLE (#1 to #4) flexible button (FLASH 70, Buttons #5 to #8) that
corresponds to the area code programmed above. The following message displays:
2. Enter the office codes that are to be allowed or removed as follows:
XXX [1] = Allow Code
XXX [0] = Remove Code from the list
3. Press HOLD after every code entered. A confirmation tone sounds and the display
updates. Multiple codes may be entered in a row. The display updates showing the first
six codes in ascending order.
DEFAULT ... No codes are on the Allow list.
STARPLUS STSe - Programming & Operations Manual
S P E C IA L TA B L E 1
S P E C IA L TA B L E 1
XXX = Area Code
(XXX = An office code from 200 to 999)
AC
AC XXX
Toll Restriction
August 2005

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents