Centrex/Pbx; Co / Pbx Programming - Vodavi STARPLUS STSe Operation Manual

Centrex/PBX

Centrex/PBX
The following features provide Centrex compatibility so that the STSe system's toll restriction
feature can correctly interpret Centrex digits.

CO / PBX Programming

Description
Each individual outside line connected to the system may be programmed as a CO or PBX
line. Use the PBX mark when identifying Centrex lines.
Programming Steps
1. Press FLASH and dial [40]. The following message displays:
2. Enter a valid number for the range of lines being programmed. If only one line is being
programmed, enter that number twice (001 001).
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 (Page A) is lit. The following message displays to indicate current
programming of that line or group of lines:
4. Press the CO/PBX flexible button (Button #2).
5. Enter a 0 or 1 which corresponds with the following entries:
[0] = PBX
[1] = CO
6. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT ... All lines are assigned as CO lines.
STARPLUS STSe - Programming & Operations Manual
CO L I N E AT T R I B U T E S
S E L EC T A CO L I NE R A NG E
If HOLD is pressed without entering a CO line range, all CO lines are selected.
XXX - XXX PAGE A
E N T E R B U T TO N N U MBE R
XXX-XXX = CO Line Range
PBX / CO
CO
Features and Operation
0-1
2-57
August 2005