Vodavi STARPLUS STSe Operation Manual page 503

Programming the Voice Mail System
Programming Flashprom
This screen is used to upload new software versions for the Flash-based Voice Mail. To access
this area of programming, you must type the number 18 while on the Programming Menu
screen. You cannot access option 18 with the arrow keys. Option number 18 is a valid option,
even though it is not listed on the menu. Use the following steps to complete the upload
process:
1. After typing 18, press <ENTER>. A screen will appear with the prompt "Programming
Flashprom. Are you sure?"
2. Type "y" , then press <ENTER>.
3. Using the pulldown menu, select Transfer>Send_Text File.
4. Browse to the location of the upload file. The upload file is identified as V70cxx (where xx
reflects the version number). The upload file is normally obtained via the Vodavi website
or via Vodavi-provided 3.5 inch floppy disk.
5. After you select the upload file, either double-click on it or click on "Open" . The
HyperTerminal screen will reflect "Recording Flashprom Addr:" and numbers will appear
following this label. The numbers will increment during the upgrade process. When the
upgrade is complete, a second line will appear under the "Recording Flashprom Addr:"
label.
6. Type "y" , click on <ENTER>, then wait for the number on the second line to change
momentarily.
7. After the number changes, cycle power of either the KSU or the Flash-based Voice Mail
card off then on.
8. Select or type option 7 from the Programming Menu screen, then press <ENTER>.
9. Confirm that the software version has updated.
STARPLUS STSe - Programming & Operations Manual
Ensure that you select the "All Files (*.*)" option in the Files of Type field, so
that the upload file is accessible.
C-37
Flash-Based Voice Mail
August 2005