Did/Iclid Ringing Assignments - Vodavi STARPLUS STSe Operation Manual

2-116
Features and Operation

DID/ICLID Ringing Assignments

Description
DID/ICLID Ringing Assignments let you change the ring assignment based on the incoming
number received. This feature permits you to select from 252 ringing routes for each entry in
the name to number translation table (Flash 55). For example, this feature could be used to
reroute selected customers to a specific UCD group and bypass the general Attendant.
The Direct Inward Dialing (DID) feature permits one-way direct inward dialing access to
stations on specific DID lines from the public telephone network, without going through an
Attendant answering position. DID capabilities refer to incoming calls only.
The system accepts 3-7 digits from the Central Office. This lets the number and name field of
the LCD display on a DID. Calls are identified in the SMDR field as answered (I) or Unanswered
(U) followed by the DID number. At least one DTMF receiver must be installed.
Programming Steps
1. Press FLASH and dial [43]. The following message displays.
2. Press the RING ASSIGNMENT flexible button (Button #1). LED #1 is lit indicating Route
000 is ready for programming.
To change to a different DID Route:
Press the UP button (Button #18) to advance to the DID Route Number, or
Press the DOWN button (Button #19) to return to a previous DID Route Number, or
Press (Button #20) and dial a desired route number followed by HOLD to change to a
specific route.
3. Enter a valid Destination (DDD) or (DDDD) and Ring type (R) followed by HOLD. A
confirmation tone sounds and the display updates.
-or-
If Ringing Assignment is for a specific Tenant Group Attendant, enter a two-digit entry of
[0] and Ring type (R) followed by HOLD.
Valid 3- and 4-Digit Destinations (DDD) and (DDDD)
System Speed Bins [9020-9099], for Off-Net Ringing
Flexible Extension Numbers*
Flexible Numbers for Voice Mail Groups 1–8*
Flexible Numbers for Hunt Groups 1–8*
Flexible Numbers for Direct Ringing to Modem*
Flexible Numbers for UCD Groups 1–16*
Local Number/Name Translation Table Number [600-799]
* Internal flexible numbers range = 100-8999
STARPLUS STSe - Programming & Operations Manual
R O U T E 0 0 0 D D DD R
000 = Route Number (000–251)
DDDD = 3- or 4-Digit Ringing Destination Number
R = Ringing Type
Valid Ring Types (R)
[0] = No Ring; unassigned; or to delete a station
[1] = Day Ring [D]
[2] = Night Ring [N]
[3] = Day/Night Ring [DN]
[4] = Special Only [S]
[5] = Day/Special [DS]
[6] = Night/Special [NS]
[7] = All Modes [Day/Night/Special [A]
Direct Inward Dialing
August 2005