Station Attributes; Initialize Station Attributes - Vodavi STARPLUS STSe Operation Manual

2-280
Features and Operation

Station Attributes

Initialize Station Attributes

Description
The Station Parameters may be initialized setting all data fields to their original, default
values. The following data fields are returned to their default value upon initializing the
Station Attributes.
Program
Code
FLASH 50/51
PAGE A
FLASH 50/51
PAGE B
STARPLUS STSe - Programming & Operations Manual
Table 2-23: Station Attribute Defaults
Flexible
Button
1 Paging Access
2 Do Not Disturb
3 Conference Enable/Disable (Per Station)
4 Executive Override
5 Privacy (Per Station)
6 System Speed Dial Access
7 Line Queuing
8 Preferred Line Answer
9 Off-Hook Voice Over (OHVO)
10 Call Forwarding
11 Forced Least Cost Routing
13 Executive Override Blocking
14 CO Line Ringing Options
15 Name/Number Display at Idle
17 CO, Loop, Pool
18 Admin Access
1 Station Identification
2 Station Day Class of Service (COS)
3 Station Night Class of Service (COS)
4 Speakerphone/Headset Programming
5 Pick-Up Group(s) Programming
6 Paging Zone(s) Programming
7 School Zone
8 Line Group Access - Station
9 LCR Class of Service (COS)
10 Off-Hook Preference Programming
11 Flexible Button Programming
12 Keyset Mode
Features
Station Attributes
Default Value
(after initialization)
Enabled
Enabled
Enabled
Disabled
Enabled
Enabled
Enabled
Enabled
Disabled
Enabled
Disabled
Disabled
Muted Ring
Name (Enabled)
Disabled
Disabled
0 (STSe 24-Btn Keyset)
6 (SLT w/o MW)
COS 1
COS 1
0=Full Speakerphone
Group 1
Zone 1
Disabled
Group 1
0 (Unrestricted Access)
00=No specific button
preferred; Enabled
(blank)
Inactive Mode
August 2005