Vodavi STARPLUS STSe Operation Manual page 218

Starplus stse key systems
Hide thumbs Also See for STARPLUS STSe:
Table of Contents

Advertisement

2-194
Features and Operation
Programming Steps
1. Press FLASH and dial [41]. The following message displays:
2. Press Button #9. The following message displays:
3. Enter a valid number on the dial pad.
[0] = Disabled
[1] = Enabled
4. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT ... Disabled (0) is the default.
Operation
If DID signaling is used, there are no operational steps required - the calling party's name is
displayed if FLASH 41, Button #9 is enabled.
If DNIS or ANI signaling is used, press the preprogrammed flexible button (feature code 653)
to enable the Caller ID/Number function. The flexible button acts as a toggle - LED lit =
enabled (calling party name and number display as shown in upper LCD examples of
2-13
through
shown in the bottom two LCD examples of
Conditions
»
The PRI line from the telephone company must be capable of providing calling-party
names.
»
The Name/Number Display When Using PRI feature is available with software version V1.02
and higher.
»
The LCD display of names/numbers will be truncated if they are longer than the space
you allowed in Flash 41 programming.
»
The Telco-provided name of the caller is always a 15 digit string, regardless of the actual
length of the caller's name. The following conditions are based on default settings of
Flash 41, Buttons #9, #10, and #11.
When using DNIS or ANI signaling (FLASH 40, Page B, Button #1), if the DID number
and the name in the Name/Number Translation Table (set in FLASH 55) exceeds nine
digits (including the space between them), the name in the Name/Number
Translation Table will be truncated to accommodate 15 digits for the calling party
name display, e.g., VODAVI COMM SYSTEMS is truncated to VODAV in the upper two
examples of
STARPLUS STSe - Programming & Operations Manual
CO FEAT URES
E N TE R B UT TON NUMB ER
D I S P L AY P RI NA ME
D I S A B LE D
Figure
2-16), LED unlit = disabled (calling party name or number displays as
Figure
2-13.
0-1
Figure 2-13
through
Figure
ISDN
Figure
2-16).
August 2005

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents