Vodavi STARPLUS STSe Operation Manual page 220

2-196
Features and Operation
4. Press button #21. The display updates to reflect current programming for Page C.
Flash 50 - Fixed Numbers
XXX - XXX PAGE C
E NT ER B U T TO N NUMB ER
XXX-XXX = fixed station range
5. Press Button #8. The following message displays:
6. Dial the station number (seven to ten digits).
7. Press the HOLD button. A confirmation tone sounds and the display updates
Conditions
»
This feature does not apply to CO to CO calls.
STARPLUS STSe - Programming & Operations Manual
O U T B O U N D D I D N U M B ER
To prevent a previously programmed station number from displaying by this feature,
use Flash 50/51, Page C, Button #8 and press HOLD.
The Outbound DID Number On PRI feature does not work if the call is processed
through a network before dialing out. The feature will work if a call is dialed out directly
from a hub or node over its own Telco PRI line.
Flash 51 - Flexible Numbers
S XXX PAG E C
EN TE R B UT TO N N U MBE R
XXX = 3- or 4-digit flexible number
ISDN
August 2005