Vodavi STARPLUS STSe Operation Manual page 149

Direct Inward Dialing
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 (Page A) is lit. The following message displays to indicate current
programming of that line or group of lines:
4. Press Button #14. The following message displays:
5. Dial a valid number (0-2) on the dial pad.
[0] = Immediate Start
[1] = Wink Start
[2] = Delay Start
6. Press HOLD to save the entry.
DEFAULT ... DID/TIE Signaling is set to Wink Start.
STARPLUS STSe - Programming & Operations Manual
XXX - XXX PAGE A
E N T E R B U T TO N N U MBE R
XXX-XXX = CO Line Range
D I D / T IE SI G N AL I NG
W I N K
Features and Operation
0-2
2-125
August 2005