Entering Toll Table - Vodavi STARPLUS STSe Operation Manual

Starplus stse key systems
Hide thumbs Also See for STARPLUS STSe:
Table of Contents

Advertisement

2-320
Features and Operation
Related Information
Flash 40
Flash 50
Flash 50

Entering Toll Table

Description
All toll tables have been conveniently placed under one program code to allow entry of all
toll restriction data.
When the system searches the Allow and Deny tables, the entries are checked starting with
Bin 01 and proceeding sequentially through the table to the last bin. In addition the Allow
Table is always searched before looking at the Deny Table. Therefore, the entry order is
important. Entries that are specific (e.g., [1716] ) are placed ahead of entries that are more
general (usually include Do Not Care digits; e.g., [1 D 1] ).
Once a match is found in the Allow Table that references a Special Table, the number dialed
are checked for an allowed code in the Special Table. If a match is not found in the Special
Table, the system continues to check for a match in the next Allow or Deny Table to check.
The system does not return to the table that sent the call to the Special Table.
Programming Steps
If the system is in the programming mode, continue using the program codes. If starting to
program here, enter the programming mode.
1. Press FLASH and dial [70]. The following message displays:
2. To program Allow/Deny tables, press the appropriate Table button and enter information
as outlined in the following procedures.
3. To program Special Tables 1-3, it is necessary to associate an area code to the table. This is
done by pressing the appropriate AREA CODE TABLE button and assign the area code.
4. To display entries in any of the tables, press the DISPLAY TABLES button (FLASH 70,
Button #12). Entries in the Allow/Deny tables display two at a time. Entries in the Special
tables display six at a time in ascending order.
STARPLUS STSe - Programming & Operations Manual
Quick Reference
Page A
Button #9 Class of Service (refer to
page
2-62).
Page B
Button #2 Day (Special) Class of Service (refer to
Class of Service" on page
Page B
Button #3 Night Class of Service (refer to
Service" on page
E X TA B L ES
E N T E R B U T TO N NU MB ER
Special Table 4 is reserved for the home area code and does not require an area
code entry.
"Class of Service - CO Line" on
"Station Day
2-63).
"Station Night Class of
2-64).
Toll Restriction
August 2005

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents