2-84
Features and Operation
Seize Timer
Description
The Seize Timer option allows the user to adjust the Seize Timer on a per CO Line basis. The
Seize Timer is used on ground start type trunks. This Seize Timer is a lead filter timer. The CO
must provide ground at the tip lead for longer than this timer in order for the system to
recognize it.
Programming Steps
1. Press the SEIZE TIMER Button (FLASH 40, Page C, Button #7) in the flexible button field.
The following message displays:
2. Enter a valid number on the dial pad which corresponds to 000–255 (100 ms to 2.55
seconds).
3. Press the HOLD button to save the entry. A confirmation tone heard and the display
updates.
DEFAULT ... Seize Timer is set for 0.1 seconds.
Transmit Volume
Description
Up to ten volume levels are available for each CO Line in the system.
Programming Steps
1. Press FLASH and dial [40]. The following message displays:
2. Enter a valid number for the range of lines being programmed. If only one line is being
programmed, enter that number twice (001 001).
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible Button #19 (Page A) is lit.
STARPLUS STSe - Programming & Operations Manual
S E I Z E TI M ER
0 1 0
Do NOT adjust this option without consulting Technical Support first. The default
settings were set to apply to most applications. Have the dB readings on all CO lines
available when calling Technical Support.
CO L I N E AT T R I B U T E S
S E L EC T A CO L I NE R A NG E
If HOLD is pressed without entering a CO line range, all CO lines are selected.
CO Line - Incoming Ringing Assignment
000-255
August 2005