Name/Number Translation Table - Vodavi STARPLUS STSe Operation Manual

Name/Number Translation Table

5. Enter a 0 or 1 on the dial pad to enable/disable this feature.
[0] = Extension Number
[1] = Name
6. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT ... Name displays on the LCD.
Conditions
»
Not applicable to Single Line Telephones.
»
Only one station at a time can be programmed when using a flexible station number.
»
When in Flash 51 programming, if you press HOLD without specifying a flexible number
to be programmed, you will get the station that is in port/station 100.
Name/Number Translation Table
Description
An administrable table in the KSU provides a local translation from a received calling number
to a name. This can be administered by the customer from the Attendant console. This table
is also shared by the ICLID features. In cases of conflict between the name delivered from the
CO and that in the local translation table, the local translation table rules. 200 entries are
provided in this table for the system.
An option was added to the Local Number/Name translation table to route an ICLID or Caller
Entered ID Digits, based on a partial compare with the number entered in the translation
table.
Programming Steps
1. Press FLASH and dial [55]. The following message displays:
The Route Number LED (Button #1) is lit.
2. Enter a Route Number (000–251) from what was entered in ICLID Ringing Assignments,
FLASH [43].
STARPLUS STSe - Programming & Operations Manual
If a match is found between a number in the translation table and an incoming call
record, the translated name is displayed and/or stored in the unanswered call table.
S - XXX ## # ,
XXX = Table Number 600-799
### = Route Number 000–251
2-233
Features and Operation
August 2005