Slt Hook Flash Timer; Slt Hook Flash Bounce Timer - Vodavi STARPLUS STSe Operation Manual

Single Line Telephone

SLT Hook Flash Timer

Description
The SLT Hook Flash Timer determines how long an SLT user presses the hook switch for it to
be considered a valid on hook (disconnect) request. An on-hook shorter in duration (but
longer than the Hook Switch Bounce Timer) is considered a Hook Flash (transfer) request.
Refer to Figure 2-21 on page
The SLT Hook Flash Timer setting is variable from 0.5-2.0 seconds.
Programming Steps
1. Press the SLT HOOK FLASH TIMER button (FLASH 01, Button #14)
.
2. Enter a valid number that corresponds to 0.5-2.0 seconds in 1/10 second increments.
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT ... SLT Hook Flash Timer is set at 10 (one second).

SLT Hook Flash Bounce Timer

Description
The SLT Hook Flash Bounce Timer determines the time needed to determine a valid on-hook
or off-hook condition for single line telephones. On-Hook or Off-Hook signals that are shorter
in duration than this timer are ignored by the system. Refer to
The SLT Hook Flash Bounce Timer setting is variable from 0-1 seconds in 10 ms increments.
This is a 3-digit entry where 010 equals 0.1 seconds.
STARPLUS STSe - Programming & Operations Manual
2-271.
Some SLTs have a fixed or programmable Flash Timer (Flash or Tap button). This
Hook Switch Timer must be set longer than the SLT Flash Timer to allow Hook Flash
transfer.
H OO K S W I TCH T IM E
1 0
Figure 2-21: Hook Switch Activity
Features and Operation
05-20
Figure 2-21.
2-271
August 2005