Voice Mail
Retrieve Mail Index Entry
Description
The Retrieve Mail Index specifies the digits to be outpulsed when the in-band digits are sent
to a Voice Mail system. These digits are required to connect a station user to their mailbox.
Programming Steps
1. Press the RETRIEVE flexible button (FLASH 65, Button #11).
2. Enter a valid outpulsing table number (0-7) on the dial pad.
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
To delete a retrieve mail index entry:
1. Press the pound key [#].
2. Then press HOLD.
DEFAULT ... Voice Mail Group 1 (440) Retrieve Mail Index is set to 1.
Station Assignments
Description
Up to 24 extension numbers may be programmed into a voice mail group. A flexible button
may be programmed with a fixed or flexible voice mail group pilot number (440-447 = fixed).
This button then acts as a DSS for that voice mail group when pressed and also serves as the
message waiting indication for that VM group.
Programming Steps
1. Press the STATION ASSIGN flexible button (FLASH 65, Button #12).
2. Enter SSS 1 to add a station (SSS = 3- or 4-digit flexible VM station number),
-or-
Enter SSS 0 to delete a station (SSS = 3- or 4-digit flexible VM station number).
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
STARPLUS STSe - Programming & Operations Manual
V XXXX R E TR IE V E M AI L
#
V XXXX STA
## ## , ## ## , ## ## ,
# ## #, ### #, ### #, ## ## , ## ##
Features and Operation
0-7
2-335
August 2005