Disa Call Forwarding - Vodavi STARPLUS STSe Operation Manual

2-130
Features and Operation
Programming Steps
1. Press FLASH and dial [40]. The following message displays:
2. Enter a valid number for the range of lines being programmed. If only one line is being
programmed, enter that number twice (001 001).
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 (Page A) is lit. The following message displays to indicate current
programming of that line or group of lines:
4. Press the DISA flexible button (Button #7).
5. Enter a valid number (0-4) on the dial pad to indicate type of DISA desired.
[0] = No DISA
[1] = 24-Hour DISA
[2] = Night DISA
[3] = 24-Hour DISA with forwarding
[4] = Night DISA with forwarding
6. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT ... No outside lines are assigned as DISA lines.

DISA Call Forwarding

Four options are available for a DISA line: 1) 24-hour, 2) night, 3) 24-hour with forwarding,
4) or night with forwarding. The CO line ringing at a station follows preset forward or no-
answer call forward using the preset forward timer the same as an initially ringing CO line
does. It follows direct forward and busy forward the same as an initially ringing CO line. If the
preset forward timer is set to 00 (disabled) the first forward of the DISA ringing call at a
station takes 15 seconds.
STARPLUS STSe - Programming & Operations Manual
CO L I N E AT T R I B U T E S
S E L EC T A CO L I NE R A NG E
If HOLD is pressed without entering a CO line range, all CO lines are selected.
XXX - XXX PAGE A
E N T E R B U T TO N N U MBE R
XXX-XXX = CO Line Range
D I S A T YP E
N O N E
Direct Inward System Access (DISA)
0-4
August 2005