Initialize Did-Tie Parameters - Vodavi STARPLUS STSe Operation Manual

Direct Inward Dialing

Initialize DID-TIE Parameters

Description
The DID-TIE Parameters and Timers may be initialized, setting all data fields to their original
default values.
Program Code
FLASH 41
Programming Steps
1. Press the DID-TIE PARAMETERS flexible button (FLASH 80, Button #13). The following
message displays:
2. Press the HOLD button. A confirmation tone sounds.
STARPLUS STSe - Programming & Operations Manual
Table 2-8: DID-TIE Parameter Defaults
Flexible
Features
Button
MISCELLANEOUS CO PARAMETERS
1 Dial Pulse Parameters
3 DID Digits
5 DID Incoming Signal
6 T-1 Incoming Signal
7 T-1 Framing Type
8 LCOB Loop Length
9 Display PRI Name
11 CO Tolerance
12 Shared Tenants CO
I N I T I A LI Z E D I D - T I E TM R S
P R ES S H O L D
Features and Operation
Default Value
(after initialization)
60/40 10 pps
3
DTMF
DTMF
D4SF-AMI
1=Long
0=Disabled
Enabled
Disabled
August 2005
2-127