Preset Forward Voice Mail Id - Vodavi STARPLUS STSe Operation Manual

Direct Inward Dialing
Conditions
»
Preset Call Forwarding (CO Line) will not occur if initial ringing is to a group,
e.g., UCD, VM, or hunt group.

Preset Forward Voice Mail ID

Description
When a route is preset forwarded or rings directly into a VM group and a number is entered in
this area of programming, the call will be sent to the voice processing system. If no number is
entered in this area of programming, and the DID call is preset forwarded or rings directly
into a VM group, it will pass the DID as the VMID.
When forwarded to VM, the standard leave and retrieve tables for the destination VM group
will be utilized.
Programming Steps
1. Press FLASH and dial [43]. The Button #1 LED is illuminated and the following message
displays:
2. Enter a valid number for the route to be programmed.
3. Press Button #5 and the following displays:
4. Enter a valid number on the dial pad that corresponds to 0-9999 for Voice Mail ID digits.
5. Press HOLD to complete the entry. A confirmation tone sounds and the display updates.
To delete numbers currently entered:
1. Press [#] button four times.
2. Press the HOLD button to update (all information is erased).
DEFAULT ... No digits are sent.
STARPLUS STSe - Programming & Operations Manual
R O U T E 00 0 D DD D RR
000 = Route Number ( 000-251)
DDDD = 3- or 4-Digit Ringing Destination Number
R = Ringing Type
P R ES E T FOR WAR D V MI D
# ## #
0-9999
2-119
Features and Operation
August 2005